The rotary dryers can be sized up to 23 feet in diameter or as small as 6.5 feet. The energy and drying system can be sized up to 158,000 PPH of bone dry material with 143,000 PPH of water evaporation in a single system. Internals are designed based on material to ensure optimal drying conditions. Minimal air leakage due to SPE proven seal technology is a trademark for the SPE rotary dryers. SPE can design the dryer with a high efficiency cyclone or SPE designed drop out box. Teaford can provide a biomass combustion system with either burning a high moisture content fuel on Teaford style reciprocating grate or with a dry sanderdust burner and combustion chamber. Check with us today for your pellet, OSB, MDF, particleboard or other biomass drying application.

The superheated steam fiber dryer operates in a closed loop system. Wet biomass is injected via the blow line and dried in the closed superheated steam loop to the desired moisture content. Dried fiber is discharged through a rotary airlock to improve air loss and maintain a sealed environment. The recirculated steam passes through a heat exchanger for superheating before used for drying again. Superheated steam dryers can be used with any type biomass from wood to other agricultural materials. Single systems up to 55,000 PPH bone dry material. A Teaford biomass combustion system would heat the other side of the heat exchanger and lower the emissions requirements required because of the closed dryer loop. Check with us to see if a superheated steam dryer is the right biomass drying application for you.